CFM70 Series Pushbutton Pendants
Assembled to Order Single- and Two-Speed Pushbutton Pendants. 2, 4, 6, 8, 10, and 12 Button Positions

Part Number

Number of Buttons

Button Operation

CFM71-2

2

ON/OFF

CFM71-21

2

All Single-Speed

CFM71-22

2

All Two-Speed

CFM72-21

4

Single-Speed with ON/OFF

CFM72-22

4

2 Two-Speed with ON/OFF

CFM72-41

4

All Single-Speed

CFM72-42

4

All Two-Speed

CFM73-41

6

4 Single-Speed with ON/OFF

CFM73-42

6

4 Two-Speed with ON/OFF

CFM73-61

6

All Single-Speed

CFM73-62

6

All Two-Speed

CFM74-61

8

6 Single-Speed with ON/OFF

CFM74-62

8

6 Two-Speed with ON/OFF

CFM74-81

8

All Single-Speed

CFM74-82

8

All Two-Speed

CFM75-81

10

8 Single-Speed with ON/OFF

CFM75-82

10

8 Two-Speed with ON/OFF

CFM75-101

10

All Single-Speed

CFM75-102

10

All Two-Speed

CFM76-101

12

10 Single-Speed with ON/OFF

CFM76-102

12

10 Two-Speed with ON/OFF

CFM76-121

12

All Single-Speed

CFM76-122

12

All Two-Speed

Specifications

Mechanical: Recommended Cable: Type "SO" Or Equivalent, Copper Conductors, 60/75 Deg. C.
Cable-Boot (Bushing) Diameters: Minimum Size - 10mm. Maximum Size - 29.1mm
Choice of Button Labels for the CFM70 Series: Up, Down, East, West, South, North, On, Off, In, Out, High, Low, Raise, Lower, Start, Stop, Open Close, Fast, Slow, Right, Left, Forward, Reverse, Trolley, Hoist, Magnet, Bridge, Door, Crane, No 1, No 2, No 3.
Notes: Position Numbers from Top to Bottom are 1 To 12. Momentary On/Off Switch Standard. On/Off Switches are Always Positions 1 and 2.
For On-Wired Pendants: Specify Cable Sleeve (Bushing) Outside Cable Diameter.
For Pre-Wired Pendants: Specify Connection on an Attached Diagram, and Specify Cable Length.
For Special Switch Requirements: Specify Switch Position Number and Any Special Instruction an the Order Form/Price Request Form.

Switch Codes

Switch Descriptions, for Assembled to Order Pendants

Operation

UNB

Two-Button, On/Off, Push On/Push Off (Mounted In Positions 1 & 2)

Maintained On/Off

UNC

Two-Button Operation, Contacts: NO - NO

Momentary With Mechanical Interlock

UNC11

Two-Button Operation, Contacts: NO - NC X2

Momentary With Mechanical Interlock

UNJ10

Two-Button Operation, Contacts: NO - NO

Momentary Without Mechanical Interlock

UNJ01

Two-Button Operation, Contacts: NO - NC, Used For 3-Wire On/Off Switch

Momentary Without Mechanical Interlock

UND

Single-Button/Two-Step, Contacts Sequences

Two-Step Momentary For Two-Speed Control

UNE

Alternate-Action Switch, Single-Button

Selection 1: N 0, Selection 2: N C

UNH

Rubber-Blank, Hole-Plug, Single-Button

Required For All Odd-Numbered Button Sets

UNAVW401R

Red Mushroom-Switch, Single-Button, NC X 1

Twist-On/Push-Off

UNASW2K10

Key-Switch, Single-Button, NO

On/Off

UNASW302

Selector-Switch, Single-Button

Left/Both/Right Three-Position Selection

UNABW3101

Single-Button, NO

Momentary

Optional Switch Configuration Instructions

Notes: Position Numbers From Top To Bottom Are 1 To 12. Momentary On/Off Switch Standard. On/Off Switches are always Positions 1 And 2.
Adder for Maintained Of/?Off Switch: Add Suffix "M" for a Maintained On/Off Switch.
Adder for 1 Red Mushroom Emergency Stop Button Requires 2 Button Positions: Add Suffix "RM" followed by the Position Numbers.
Adder for 2 Two-Speed button in lieu of 2 Single-Speed Buttons: Add Suffix "BB" to Part Numbers Followed by the Positions Numbers

Example of Notation for Parts numbers Adders: To indicate a Two-Speed Hoist, Single-Speed Bridge & Trolley with a Maintained On/Off Switch, select the closest complete part Number; i.e., CFM74-61 (8 buttons, 6 Single-Speed, with Momentary On/Off). The complete Part Number would be CFM74-61MBB34.