 |
Click a Category for a List of Products:
|
|
Click a Product for Quick Access:
• Accelerator Units
• Crane Controls, Bridge & Trolley
• Crane Controls, Travel Drive
(Bridge & Trolley) Ordering
Information
• Crane Controls, Hoist
• Crane Controls, Hoist Ordering
Information
• DC Contactors, Electromechanical
• DC Contactors, Solid State
• DC Motor Soft Starts, Solid State
• High Voltage Resistors
• Hoist Push Button Pendants
• Inverters, Transit Industry
• Lift Table Push Button Pendants
• Magnet Control, Solid State
• Mining Vehicle Traction Controls
• Onboard Battery Chargers
• Push Button Pendants
• Shunt Motor Controls, Solid State
• Shuttle Car Control
• Switch Point Controls, Transit Industry
• Transit Vehicle Traction Controls
|
|
Cableform Model COB213 Pushbutton Pendant
Direct Operation of Single-Phase Motors up to 1HP, 120 Volts AC (2HP/220VAC)
Features
- UL listed for the United States and Canada
- Complete FORWARD/REVERSE motor operation
- Internal FORWARD/REVERSE power contacts
- Silver power contacts rated 120volts AC, 25 amps
- Split-case for easy cable installation
- Cable-boot prevents entry of foreign matter
- Rain-proof - dust-proof - shock-proof
- Legends: UP/DOWN or IN/OUT, others available
- One-hand operation
- External and internal strain-reliefs
- Internal-cable-clamp
- High-impact plastic case
- Color: high-visibility orange
Advantages
- Eliminates external reversing contactors
- Eliminates the need for a control panel
- Reduces number of components
Especially Suited For Direct Motor Operation of
- Hoists
- Winches
- Scissor-Lift-Tables
- Dock Levelers
- Overhead Doors
Mechanical:
NEMA 12. |
|
Recommended Cable: |
Type "SO" or equivalent, copper conductors, 60/75 Deg. C, size AWG 10/6 maximum. |
Cable-Boot (Bushing) Diameters: |
Min. cable size - 8mm Max. cable size - 19.6mm |
External Strain-Relief: |
A bar in the cable allows the attachment of an optional strain-relief wire. |
Internal Strain-Relief: |
A screw inside the pendant case, located above the switches, allows the attachment of an optional strain-relief wire used in some cables. |
Torque Values: |
Enclosure screws.......................11in/lbs
Terminal Screws........................10in/lbs
Internal cable-clamp.....................6in.lbs
Internal strain-relief screw............14in/lbs
External cable-bushing clamp........8in/lbs
|
Switches: |
Rated 300,000 operations. |
Electrical:
120VAC, 1HP
|
220VAC, 2HP
|
120VAC, 25A resistive (intended for intermittent duty using a 10 AWG cable that is not in excess of 6 feet)
|
Recommended short circuit protection - 25A time-delay fuse (for 220V/2HP rating). |
Physical Dimensions |
Cable Boot (Bushing) |
Electrical Connections |
in millimeters and inches (approx.)
 |
Diameter (mm) Cut-off for appropriate size cable.
 |
Customer Connections:
1 , 3 Power Source
1 , 6 Main Winding
4 , 5 Starting Winding
 |
Order Part Number
COB213
Description
2-button pendant for direct operation of single-phase 120VAC, 1HP motor (220Vac, 2HP).
Button Labels
- Standard - UP/DOWN or IN/OUT
- Specify special label requirements.
See the CFM60 series and CFM70 series catalogs for single-speed pendants, two-speed pendants, and special switches.
|
