3700 Series
Linear Accelerator Unit (Operator Speed Demand)

---

The 3700 Solid State Linear Accelerator is housed in a rugged die cast cast box. It's advanced inductive system removes the troublesome potentiometer while producing a more accurate demand signal.

Input Voltage Range		12 - 80V
Output Voltage		0 - 5V and 3.85 - 0V
Life		10 Million Operations
Operating Temperature		-40°C to +50°C
Interfaces with		Competitive Controllers
Technical Summary
Fixings	By three 6mm screw fasteners.
Mechanical Input	By spring-loaded plunger. Travel of the plunger from zero position to full output is 14.5mm.
Interface Connections	By flying multicore cable terminated as specified below.
Micro Switches	'Off Position' and 'Bypass' microswitches are fitted as standard.
Features	Solid State Demand Sensing Actuator Push or Pull Linear Motion Built-in Shaft return Spring One or two limit microswitches Tested operational life: 10 million cycles Reverse polarity protection
Models Available	MODEL NOMINAL OUTPUT HARNESS TERMINATION 3711 0-5.5V Linear Tinned Ends 3712 0-5.5V Linear Connector Fitted 3713 3.85-0.2V Linear Tinned Ends 3714 3.85-0.2V Linear Connector Fitted
Standard Options	TABLE 1 VOLTAGE RANGE VARIANT 1 - 12 Volt 2 - 24 Volt to 48 Volt 3 - 60 Volt to 80 Volt TABLE 2 MATING CONNECTOR HALF VARIANT 1 - Not Supplied 2 - Supplied
	NB MATING HALF-CONNECTOR CAN BE SUPPLIED IN SEPARATE PACK. PART ORDER NO. 17716 AN EXAMPLE OF A PEDAL UNIT FOR USE ON 24 VOLTS WITH LINEAR OUTPUT AND MATING HALF CONNECTOR SUPPLIED IS: 3712 - 1 - 2.
Installation